Downloading LWS Interactive Analysis (LIA) Version 8.1 patch
From 20 November, 2000 the LWS Interactive Analysis (LIA)
version 8.1 patch is ready for you to download.
LIA 8.0 and 8.1 are valid for OLP version 8 data products
or higher...
If you have not yet installed LIA version 8.0 then click
here
to
do so first.
Major improvements with respect to previous version
include:
Routines:
-
FP_PROC:
Now
using the liac file for determining the darks measured during the observation.
The OLP 8 lsca file has the fixed dark values because we ALWAYS subtract
fixed darks for ALL FP observations. User not allowed to exceed the measured
dark or to go below the fixed dark, if it is less than the measured dark.
-
INSPECT_RASTER:
Bug
fix to return RA, DEC and RP arrays rather than scalars
-
DEFRINGE:
This
tool is written for interactive defringing of LWS data (L01, L03 and L04).
Calibration data:
-
The illuminator calibration file lcir.fits has been replaced
in order to be compatible with OLP 8 and higher The version in LIA 8.0
was appropriate for OLP 7 only.
Requirements
UNIX and IDL 5.03 or higher.
ISAP
version 2.1 should be installed on your computer, which contains
the OLP 8 and higher calibration files for the LWS. (If you have ISAP 2.0
or 2.0a or earlier, upgrade
now!)
LIA version 8.0 should
be installed on your computer, which contains the full LIA 8.0 library.
Step-by-Step Procedure to Install LIA 8.1 patch
-
Click here
to download the gzipped tar file lia8_1_2.1tar.gz; the file should
be placed one directory above the 2.1/ directory of ISAP (i.e. the
directory that contains the files 'isap', 'start_isap.idl', etc...), where
2.1 should be the version number of your current ISAP installation.
-
In the directory above the 2.1/ directory, unzip and
untar the lia_8.1.tar.gz file.
-
Make sure that the contents of 2.1/data/cal_lws, 2.1/pro/lia
and 2.1//pro/lia/lia_inter directories are world-readable
-
Simply type 'isap com' to enter LIA
Check out the
LWS data
reduction recipes
LIA Home
ISAP Home
Page