The following input parameters are entered only once
for an AOT CAM03:
Next: The following parameters
Up: Input Parameters of
Previous: Input Parameters of
- NUMBER_OF_MEASUREMENTS = total number of
observations in different configurations to be performed in this
AOT (two observations may be done with the same configuration).
- N_REF = Number of reference fields (1
N_REF
4). After entering N_REF, the observer has to enter the ordered set
of coordinates of the center of the source and of the reference
fields.
All the centers of the reference fields must lie within an area of
1.5
1.5 square degrees centered on the source.
ISOCAM Observer's Manual - V1.0
Tue Oct 31 12:06:23 MET 1995